DTC P0244 Turbo/Super Charger WASTEGATE Solenoid "A" Range/Performance: Trouble Symptom
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Poor driving performance
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode < Refer to
OPERATION , Clear Memory Mode.>, and Inspection Mode < Refer to
PROCEDURE , Inspection Mode.>.
DIAGNOSIS PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is any other DTC displayed? | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . > | Go to step 2 . |
| 2 CHECK WASTEGATE ACTUATOR PIPING AND WASTEGATE CONTROL SOLENOID VALVE PIPING. | Are there any damage or disconnection of hose in waste-gate actuator piping or wastegate control solenoid valve piping? | Connect the wastegate actuator pipe or wastegate control solenoid valve pipe properly. If defective, replace the hose. | Replace the waste-gate control solenoid valve. < Refer to WASTEGATE CONTROL SOLENOID VALVE . > |