Pulling out outer race for large tapered roller bearing

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Out Double Tapered Roller Bearing Outer Race

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove differential. Refer to Differential, removing and installing .
Place pressure piece of puller 3128 below the outer race.
Install threaded spindle and pressure bearing of assembly device 3301 with pressure plate VW 401 onto transmission housing.

When tightening bolt the outer race will be pulled out of housing.