Read Diagnostic Trouble Code (DTC): Operation
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- On << Main Menu >> display, select {Each System Check}.
- On << System Selection Menu >> display, select {Tire pressure monitor}.
- After {System Name} is displayed, select [OK].
- On << Tire pressure monitor diagnosis >> display, select {Diagnostic Code(s) Display}.NOTE:
- For detailed operation procedures, refer to the appropriate procedure.
- For details concerning DTCs, refer to List of Diagnostic Trouble Code (DTC). < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
- All DTCs detected will be displayed.
- If a particular DTC is not properly stored in memory (due to a voltage drop of the TPMS & keyless entry control module power supply, etc.) when a problem occurs, a DTC suffixed with a question mark will appears on the Subaru Select Monitor display. This shows it may be an unreliable reading.
- If TPMS & keyless entry control module and Subaru Select Monitor cannot communicate, check the communication circuit. < Ref. to INSPECTION , Subaru Select Monitor. >
- When DTC is not displayed, check the indicator circuit and communication circuit. < Ref. to TIRE PRESSURE WARNING LIGHT / TROUBLE INDICATOR LIGHT ILLUMINATION PATTERN . >