LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Airbag System (Service Information)) >> Roll Connector >> Adjustment

Roll Connector: Adjustment

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not rotate the roll connector to more than the specified number of turns. Otherwise, the roll connector internal wire may be broken.
  • When determining the end stop, rotate the connector slowly without applying excessive force. Applying excessive force at the end stop may break the internal wire.
  1. Check that front wheels are positioned in straight ahead direction.
  2. Turn the roll connector pin (A) clockwise until it stops.
  3. Turn the roll connector pins (A) approx. 3.25 turns until "Δ" marks are aligned.
    Fig 1: Aligning Roll Connector Marks
    G07680382Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals