LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Exterior Trim & Interior Trim) >> Heat Shield Cover >> Removal >> Front Heat Shield Cover

Front Heat Shield Cover

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Disconnect the connector from oxygen (A/F) sensor.
    • Turbo model: < Ref. to REMOVAL , Center Exhaust Pipe. >
    • Non-turbo model: < Ref. to REMOVAL , Front Exhaust Pipe. >
  3. Remove the exhaust pipe and muffler.
  4. Remove the four bolts to remove the front heat shield cover.
    Fig 1: Front Heat Shield Cover And Bolts
    G07666721Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals