Center Heat Shield Cover

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear exhaust pipe and muffler.
Remove the propeller shaft. (Turbo model only) < Ref. to REMOVAL , Propeller Shaft. >
Remove the bolt (A), nut (B) and clip (C) to remove center heat shield cover.

Fig 1: Locating Center Heat Shield Cover Bolt, Nut And Clip (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Center Heat Shield Cover Bolt, Nut And Clip (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.