LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Anti-Theft System - Security And Locks) >> Body Integrated Unit >> Removal

Body Integrated Unit: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the driver's side instrument panel lower cover. < Ref. to REMOVAL , Instrument Panel Lower Cover . >
  3. Remove the knee guard panel.
  4. Disconnect the harness connector of body integrated unit.
    CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
  5. Remove the mounting bolt for the body integrated unit bracket, and remove the body integrated unit.
    Fig 1: Locating Body Integrated Unit Bracket Mounting Bolt And Body Integrated Unit
    G07666544Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals