Inspecting The Spray Position

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Turn the wiper switch to OFF position.
While the vehicle is stopped, check that the washer spray position is as shown in the illustration.
After inspection, if the spray position is really out of the specified range, replace with the new washer nozzle.
Spray position:
1. 72°
2. 45 mm (1.8 in)
3. 36 mm (1.4 in)
  
  Fig 1: Inspecting Spray Position
  Courtesy of SUBARU OF AMERICA, INC.