LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (HVAC System (Heater, Ventilator And A/C)) >> Sunload Sensor (Auto A/C Model) >> Removal

Sunload Sensor (Auto A/C Model): Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the audio, (model with audio) < Ref. to REMOVAL , Audio. >
  3. Remove the navigation unit, (model with navigation) < Ref. to PROCEDURE , Navigation Body. >
  4. Push out the sunload sensor from the back side of the instrument panel.
    Fig 1: Sunload Sensor Of Back Side Instrument Panel
    G07666495Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the harness connector and remove the sunload sensor.
    CAUTION: Be careful not to damage the interior trims when removing the sensor.
scientia non olet · About LEMON Manuals