LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (HVAC System (Heater, Ventilator And A/C)) >> Blower Resistor (Manual A/C Model) >> Removal

Blower Resistor (Manual A/C Model): Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower. < Ref. to INSTRUMENT PANEL LOWER , REMOVAL, Center Console. >
  2. Disconnect the blower resistor connector.
  3. Remove the screw and remove the blower resistor.
    Fig 1: Locating Blower Resistor Screws
    G07666459Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals