LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Automatic Transmission) >> Reduction Driven Gear >> Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Separate the extension case from the transmission case. < Ref. to REMOVAL , Extension Case. >
  3. Set the range select lever to the "P" range.
  4. Lift the crimped section, and then remove the lock nut.
    Fig 1: Removing Lock Nut
    G07665609Courtesy of SUBARU OF AMERICA, INC.
  5. Using the ST1 and ST2, extract the reduction driven gear.

    ST1 499737000 PULLER

    ST2 899524100 PULLER SET

    Fig 2: Removing Reduction Driven Gear Using ST1 And ST2
    G07665610Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals