LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Automatic Transmission) >> Parking Pawl >> Installation

Parking Pawl: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the parking pawl, return spring and shaft.
    Fig 1: Parking Pawl And Return Spring
    G07665623Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reduction drive gear. < Ref. to INSTALLATION , Reduction Drive Gear. >
  3. Install the extension case. < Ref. to INSTALLATION , Extension Case. >
  4. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >