One-Way Clutch Outer Race

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the needle bearing, and then secure with the snap ring.

Fig 1: Needle Bearing And Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Install the one-way clutch and one-way clutch inner race, then secure with the snap ring.
Set the inner race. Make sure that the clutch locks in the clockwise direction and rotates in the counterclockwise direction.

Fig 2: Clutch Locking And Unlocking Direction
Courtesy of SUBARU OF AMERICA, INC.