Clutch Switch: Adjustment

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the lock nut of clutch switch (clutch start).

Fig 1: Lock Nut And Clutch Start Switch
Courtesy of SUBARU OF AMERICA, INC.
Fully depress the clutch pedal and hold it.
Adjust the gap of the clutch pedal plate and the clutch switch to be 2.0 - 2.5 mm (0.08 - 0.10 in).

Fig 2: Gap Between Clutch Pedal Plate And Clutch Switch
Courtesy of SUBARU OF AMERICA, INC.
Tighten the lock nut.
Tightening torque:

8 N.m (0.8 kgf-m, 5.9 ft-lb)