Clutch Pedal: Disassembly

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the clutch switches.
Remove the clip, assist spring, assist rod A, assist rod B, assist bushing, clevis pin and bushing.

Fig 1: Clip, Assist Spring, Assist Rod, Bushing And Clevis Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring pin and lever.

Fig 2: Spring Pin And Lever
Courtesy of SUBARU OF AMERICA, INC.
Remove the clutch pedal and pedal bushings.

Fig 3: Clutch Pedal And Pedal Bushings
Courtesy of SUBARU OF AMERICA, INC.
Remove the stopper and clutch pedal pad from the clutch pedal.

Fig 4: Clutch Pedal Pad And Stopper
Courtesy of SUBARU OF AMERICA, INC.