LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Clutch System) >> Clutch Pedal >> Assembly

Clutch Pedal: Assembly

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach the stopper and pedal pad to the clutch pedal.
  2. Install the clutch switch to the pedal bracket.
  3. Clean the pedal bushing holes of the clutch pedal and brake pedal, apply grease, and install the pedal bushings.
  4. Install the clutch pedal, brake pedal and lever to the pedal bracket, then secure with a spring pin.
  5. Install the assist rod A, assist rod B, assist bushing and assist spring to the clutch pedal and pedal bracket.
    CAUTION: Always use a new clevis pin.
scientia non olet · About LEMON Manuals