Separating cover from upholstery
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Cover
- Removal:
- Lever out grip channels - 4 - from plastic clips - 3 - using a screwdriver.
- Installing:
Installation is reverse of removal. Observe the following when doing so:
- Replaced damaged plastic clips.
2 - Upholstery
3 - Plastic clips
4 - Fastening strips