RH Side

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use new O-rings, rubbers and seal rings.

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 1: Locating Bolts Fuel Injector Pipe RH To Intake Manifold

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Bolts And Fuel Pipe Protector RH From Intake Manifold

Courtesy of SUBARU OF AMERICA, INC.