LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Fuel Injection System - Fuel Injection (H4DOTC)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07670433Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the generator. < Ref. to REMOVAL , Generator. >
  4. Drain engine coolant. < Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >
  5. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
    Fig 2: Identifying Engine Coolant Temperature Sensor Connector
    G07670434Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals