LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Fuel Injection System - Fuel Injection (H4DOTC)) >> Camshaft Position Sensor >> Removal >> Camshaft Position Sensor RH

Camshaft Position Sensor RH

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07670445Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector (A) from the camshaft position sensor RH, and remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Identifying Camshaft Position Sensor Connector
    G07670446Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals