LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Fuel Injection System - Fuel Injection (H4DO)) >> Crankshaft Position Sensor >> Inspection >> Crankshaft Position Sensor (Method With Circuit Tester)

Crankshaft Position Sensor (Method With Circuit Tester)

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between crankshaft position sensor terminals.

Fig 1: Measuring Resistance Between Crankshaft Position Sensor Terminals
G07664713Courtesy of SUBARU OF AMERICA, INC.
CRANKSHAFT POSITION SENSOR TERMINALS REFERENCE CHART

Terminal No. Standard
1 and 2 2.04±0.204 kΩ