LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Engine Cooling System (H4DOTC)) >> Coolant Filler Tank >> Removal

Coolant Filler Tank: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The coolant filler tank is pressurized when the engine and radiator are hot. Wait until engine and radiator cool down before working on the coolant filler tank.
  1. Remove the collector cover.
  2. Drain approximately 3.0 l  (3.2 US qt, 2.6 lmp qt) of coolant. < Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT. >
  3. Disconnect the engine coolant hoses from coolant filler tank.
  4. Remove the bolts which secure the coolant filler tank.
    Fig 1: Locating Bolts Which Secure Coolant Filler Tank
    G07681059Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the engine coolant hose which connects the under side of coolant filler tank.
    Fig 2: Identifying Engine Coolant Hose Clamp
    G00522252Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the coolant filler tank.
scientia non olet · About LEMON Manuals