Timing Belt

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Check the timing belt teeth for breaks, cracks or wear. If any fault is found, replace the timing belt.
Check the condition on the back surface of the timing belt. If cracks are found, replace the timing belt.
CAUTION:
- Be careful not to let oil, grease or coolant contact the timing belt. Remove quickly and thoroughly if this happens.
- Do not bend the timing belt sharply.
In radial diameter h:

60 mm (2.36 in) or more

Fig 1: Timing Belt Radial Diameter
Courtesy of SUBARU OF AMERICA, INC.