LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical (H4DOTC)) >> Timing Belt Cover >> Installation

Timing Belt Cover: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front timing belt cover (C).

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.7 ft-lb) 

  2. Install the timing belt cover LH (B).

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.7 ft-lb) 

  3. Install the timing belt cover RH (A).

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.7 ft-lb) 

    Fig 1: Front Timing Belt Cover With Mounting Fasteners
    G07670769Courtesy of SUBARU OF AMERICA, INC.
  4. Install the crank pulley. < Ref. to INSTALLATION , Crank Pulley. >
  5. Install the secondary air pump. < Ref. to INSTALLATION , Secondary Air Pump. >
scientia non olet · About LEMON Manuals