Method With SUBARU Select Monitor
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Before checking the ignition timing, check the following item:
- Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
- Check the malfunction indicator light does not illuminate.
- Warm up the engine.
- Read the ignition timing using Subaru Select Monitor. < Ref. to READ CURRENT DATA FOR ENGINE (NORMAL MODE) , OPERATION, Subaru Select Monitor. >
NOTE:
If ignition timing is out of standard, check the ignition control system. Refer to "Engine Control System". < Ref. to
BASIC DIAGNOSTIC PROCEDURE
. >
Ignition timing [BTDC/RPM]:
Standard
17°±10°/700