LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical (H4DOTC)) >> Crank Pulley >> Removal

Crank Pulley: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When replacing the single part, perform the work with the engine installed to vehicle body.
  1. Remove the V-belts. < Ref. to REMOVAL , V-belt. >
  2. Use the ST to lock the crank pulley, and remove the crank pulley bolts.

    ST 499977400 CRANK PULLEY WRENCH

    Fig 1: Locking Crank Pulley Using Special Tool
    G07670761Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crank pulley.
scientia non olet · About LEMON Manuals