LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (3.2L - Generic Scan Tool, Engine Code: BKH) >> 20 - Fuel supply >> Fuel Supply System >> Fuel Supply System

Fuel Supply System

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

For all Fuel Supply system component locations. Refer to → 20 - FUEL SUPPLY SYSTEM

For all Fuel supply system removal/installation procedures and torque specifications. Refer to → 20 - FUEL SUPPLY SYSTEM

Check the Technical Bulletins for information that may supersede any information included in this article.

NOTE:
  • All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through Audi.
  • Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.

Safety Precautions 

Rules for Cleanliness 

Fuel System, Bleeding 

Fuel Pump Delivery Quantity, Checking 

Fuel Pump Electrical, Checking