LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Body Panel System - Exterior Body Panels) >> Rear Gate >> Installation >> Rear Gate Panel

Rear Gate Panel

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install each part in the reverse order of removal.

    Tightening torque: 25 N.m (2.55 kgf-m, 18.4 ft-lb) 

  2. Install while paying attention to make a uniform clearance around the rear gate panel. For the dimension of clearance, refer to "SPECIFICATION" in "General Description". < Ref. to SPECIFICATION , General Description. >
scientia non olet · About LEMON Manuals