LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Body Panel System - Exterior Body Panels) >> Front Hood >> Removal >> Front Hood Hinge

Front Hood Hinge

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The front hood panel is very heavy. Always work with two persons when removing/installing the damper stay and hood hinges.
  1. Remove the front hood damper.
  2. Remove the bolts and front hood panel.
    Fig 1: Locating Front Hood Hinge Mounting Bolts
    G05958165Courtesy of SUBARU OF AMERICA, INC.
  3. Detach the tabs and remove the cowl side panel front.
    Fig 2: Cowl Side Panel Front And Tabs
    G07680527Courtesy of SUBARU OF AMERICA, INC.
    1. Detach tabs (A), (B), and (C) from the vehicle exterior.
    2. Detach tabs (D) and (E).
  4. Remove the front hood hinge bolts.
    Fig 3: Locating Front Hood Panel Mounting Bolts
    G05958167Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals