LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Body Panel System - Exterior Body Panels) >> Front Hood >> Removal >> Front Hood Damper

Front Hood Damper

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not damage piston rods and oil seals.
  • Never disassemble cylinders: They contain gas.
  • The front hood panel is heavy. When removing or installing the damper stay and hood hinge, be sure to work in a group of two or more.
  1. Remove mounting bolt, and remove the damper stay.
    Fig 1: Locating Damper Stay Mounting Bolt
    G05663891Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the mounting bolt of front hood damper stay.
    Fig 2: Removing Mounting Bolt Of Front Hood Damper Stay
    G05663892Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals