Wheel Alignment Of Rear Suspension
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the alignment of the rear suspension and check the following items are within the specified range.
- Toe-in
- Camber
- Thrust angle
< Ref. to WHEEL ALIGNMENT . >
- If camber is out of the specification, visually check the items listed below. If the deformation is found, replace the damaged part.
- Suspension component [shock absorber, front lateral link, rear lateral link, upper arm, trailing link, sub frame etc.]
- Parts connecting suspension and body
- If the toe-in or thrust angle is out of the specification, adjust to the standard value. < Ref. to WHEEL ALIGNMENT . >