Seal Material

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Use the seal material shown in the table below, or equivalent.

SEAL MATERIAL SPECIFICATION

Seal material	Application point	Recommended materials	Item number	Alternative
Seal material	AT converter case MT transmission case MT extension case	THREE BOND 1215	004403007	DOW CORNING No. 7038
	Transmission oil pan (AT model)	THREE BOND 1217B	K0877YA020	-
	Rear differential Oil pressure switch PCV valve (non-turbo model)	THREE BOND 1324	004403042	-
	Rear differential Service hole plug PCV nipple (turbo model)	THREE BOND 1105	004403010	DOW CORNING No. 7038
	Steering adjusting screw	THREE BOND 1102	004403006	-
	Front sealing cover Rear sealing cover	3M Butyl Rubber 8626	-	-
	Engine oil pan Separator cover Camshaft cap Cylinder block Oil pump (turbo model) Rocker cover Chain cover (non-turbo model) Oil pan upper (non-turbo model) Cylinder head (non-turbo model) Camshaft carrier (non-turbo model) Camshaft bearing cap (non-turbo model)	THREE BOND 1217G	K0877Y0100	-
	Rear differential	THREE BOND 1110B	K0879Y0020	-