Inner Window Shaft Strip, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Inner Window Shaft Strip

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal. Note The Following:

-- Attach the inner window shaft strip to the B-pillar. The sealing lug -5- must fit inside the B-pillar -4- -arrows-.

-- Attach the inner window shaft strip to the door seal.

-- Install the retaining studs -3- on the inner window shaft strip on the outside of the B-pillar.

-- Insert the he end of the inner window shaft strip -7- into the mount for the outer window shaft strip -6-.