Engine And Hydraulic Pump Fluid Reservoir

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Motor Overview And Hydraulic Pump Fluid Reservoir

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 6 Nm
- Quantity: 4
Engine
- For the hydraulic pump
- Removing and installing. Refer to HYDRAULIC PUMP MOTOR, REMOVING AND INSTALLING .
Seal
- Replace
- Before installing, lightly coat with hydraulic fluid
Mount
Valve Block
Upper Section of Noise Insulation
Oil Filler Plug
- 2 Nm
Oil Reservoir
- Removing and installing. Refer to HYDRAULIC PUMP FLUID RESERVOIR, REMOVING AND INSTALLING .
Retaining Bolt
- 6.5 Nm
Power Convertible Top Valve
- Power Convertible Top Valve 1 -N272-, Power Convertible Top Valve 2 -N341-, Power Convertible Top Valve 3 -N342-
- Removing and installing. Refer to POWER CONVERTIBLE TOP VALVE 1, 2, AND 3 -N272- / -N341- / -N342-, REMOVING AND INSTALLING .
Clamp
- 3.5 Nm
Seal
- Replace
- Before installing, lightly coat with hydraulic fluid
Lower Section of Noise Insulation