Convertible Top Cover, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Mark the rubber bands, the tension cables and the electric wires and their installed locations prior to removal to prevent confusing them up later. Draw a sketch or take a picture of them if necessary.
It is not necessary to remove the convertible top headliner when removing the convertible top cover.
Special tools and workshop equipment required
- Trim Removal Wedge:3409
- Pop Rivet Nut Pliers:VAS5072A
- Drill
- Brill diameter 4 mm.
- Protective eyewear