LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1452 (Instruments (Cabriolet)) >> 90 Instruments >> Instrument Cluster >> Outside Air Temperature Sensor, Removing And Installing >> Outside Air Temperature Sensor -G17-, Removing And Installing >> Removing

Outside Air Temperature Sensor -G17-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Outside Air Temperature Sensor -G17-, Through My 2011
GWWA90-10074Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to LOCK CARRIER .

-- Disconnect the connector -1-.

-- Carefully press the retaining clips together -arrow- and remove the Outside Air Temperature Sensor -G17- -2- upward from the bracket.



Fig 1: Outside Air Temperature Sensor -G17-
GWWA90-10150Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to LOCK CARRIER .

-- Carefully press the retaining clips together -arrow- and remove the Outside Air Temperature Sensor -G17- -2- from the bracket.

-- Disconnect the connector -1-.

NOTE:

The front bumper cover is removed in the illustration.