Overview - Interior Monitoring
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- The Interior Monitoring Transceiver Module 1 -G303- and Inclination Sensor/Anti-Theft System Control Module -J529- were combined in one component, the Anti-Theft Alarm System Sensor -G578-.
- Therefore, the Comfort System Central Control Module -J393- still only has two "LIN" participants with the "anti-theft alarm system" optional equipment.
- Individual Sensor
- For Anti-Theft Alarm System Sensor -G578-
- Removing and installing. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
- Alarm Horn -H12-
- Removing and installing. Refer to Alarm Horn -H12-, REMOVING AND INSTALLING .
- Nut
- 5 Nm
- Nut
- 7 Nm
- Alarm Horn -H12- bracket
- Frame
- For the control modules
- Comfort System Central Control Module -J393-
- Removing and Installing. Refer to CENTRAL LOCKING
- Antenna Amplifier -R24-
- With Central Locking and Anti-Theft Alarm System Antenna -R47-
- Removing and installing. Refer to ANTENNA SYSTEMS .
- Interior Monitoring Switch -E183- /Interior Monitoring Deactivation Switch -E217-
- Removing and installing. Refer to Interior Monitoring Switch -E183- /Alarm System Deactivation Switch -E217-, REMOVING AND INSTALLING .
- Front Interior Lamp/Reading Lamp
- Right Interior Monitoring Individual Sensor
- Can only be changed together with the Anti-Theft Alarm System Sensor -G578-
- Anti-Theft Alarm System Sensor -G578-
- Removing and installing. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
- Left Interior Monitoring Individual Sensor
- Can only be replaced together with the Anti-Theft Alarm System Sensor -G578-