Overview - Rear Lid

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Lid Hinge, Gas-Filled Strut, Stop And Rear Lid Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Cap
Fitting Bolt
- 21 Nm
Left Hinge
- For the rear lid with stop
- Removing and installing. Refer to HINGES, REMOVING AND INSTALLING .
Bolt
- 21 Nm
Nut
- 21 Nm
Rear Lid
- Removing and installing. Refer to REAR LID, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING .
Left Stop
- For body stop
- Removing and installing. Refer to STOP, REMOVING AND INSTALLING .
Left Adjusting Buffer
- Removing and installing. Refer to ADJUSTING BUFFER, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING .
Right Stop
- For body stop
- Removing and installing. Refer to STOP, REMOVING AND INSTALLING .
Right Adjusting Buffer
- Removing and installing. Refer to ADJUSTING BUFFER, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING .
Right Hinge
- For the rear lid with stop
- Removing and installing. Refer to HINGES, REMOVING AND INSTALLING .
Cover
- For the wiring harness for the hood
- Removing and installing. Refer to WIRING HARNESS COVER, REMOVING AND INSTALLING .
Right Gas-Filled Strut
- Removing and installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
Left Gas-Filled Strut
- Removing and installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .