LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Hood, Lids (Cabriolet)) >> 55 Hood, Lids >> Hood >> Overview - Release Cable >> Cable, Attaching In Lid Lock

Cable, Attaching In Lid Lock

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cable, Engaging In Hood Lock
GWWA55-10318Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Front Release Cable
    • Insert the cable nipple in the operating lever in the hood latch.
  2. Release Cable for Right-Hand Drive
  3. Hood Latch
    • Engage the release cable guide in the lower part of the hood latch.
  4. Lock Carrier
  5. Clip
    • Slide the clamp with the electrical wire onto the tab in the lock carrier.