Hinges, Removing And Installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Gas-Filled Strut
- Install the gas-filled strut tube on the hood side.
- Removing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Hood
- Hood Hinge
-- Before removing a hinge, support the lid or secure it to keep it from falling.
-- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Remove the bolts -4- and nuts -5-.
- Install in reverse order of removal.
- Nut
- 21 Nm
- Nut
- 21 Nm