LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Hood, Lids (Cabriolet)) >> 55 Hood, Lids >> Convertible Top Compartment Cover >> Convertible Top Compartment Cover Seal, Removing And Installing >> Installing >> Notes

Convertible Top Compartment Cover Seal, Removing And Installing: Installing: Notes

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- The front side of the seal -1- must line up with the seam -2- in the body panel.

-- Install the outer and inner window shaft strips. Refer to OUTER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .