Headlamp, Changing From RHD To LHD, Halogen Headlamps Through My 2011, USA Through My 2012: Procedure
The cover foil has a molding (marking foil), which must be placed along the line around the headlamp lens so that it covers the asymmetrical area of the low beam.
-- Clean the headlamp glasses and dry them.
Headlamp Driver's Side:
-- Peel off the protective film from the protective backing.
-- Lay the cover foil flush along the line -2- going around the headlamp lens.
-- Affix the cover foil to the headlamp lens as illustrated above.
-- Separate the marking foil -3- from the protective backing -1- at the perforation -arrow- and pull it off the headlamp glass.
Headlamp Passenger's Side:
-- Peel off the protective film from the protective backing.
-- Lay the cover foil flush along the line -3- going around the headlamp lens.
-- Affix the cover foil to the headlamp lens as illustrated above.
-- Separate the marking foil -2- from the protective backing -1- at the perforation -arrow- and pull it off the headlamp glass.