Overview - Rear Seat Backrest

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Seat Backrest Assembly

Courtesy of AUDI OF AMERICA, LLC

Rear Seat Belt Latch
- Removing and Installing. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
Nut
- Tightening Specification OVERVIEW - REAR SEAT BELT LATCH
Nut
- 4 Nm
Side Cushion
- Removing and Installing. Refer to SIDE CUSHION, REMOVING AND INSTALLING .
Rear Seat Backrest
- Removing and Installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Cover
- for the striker
- Removing and Installing. Refer to STRIKER COVER, REMOVING AND INSTALLING .
Bolt
- 32 Nm
Bolt
- 3.5 Nm
- Quantity: 4
Striker
- Removing and Installing. Refer to STRIKER, REMOVING AND INSTALLING .
Backrest Shell
- Front side taped with double-sided adhesive tape
- Removing and Installing. Refer to REAR SEAT BACKREST SHELL, REMOVING AND INSTALLING .
Bolt
- 4 Nm
- Quantity: 16
Bolt
- 32 Nm
- Quantity: 4
LATCH Child Seat Anchor
- Welded to the backrest frame Remove the backrest frame to replace. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING ON BACKREST FRAME .
Backrest Frame
- With ISOFIX child seat anchor
- Removing and Installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING ON BACKREST FRAME .