LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1424 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Rear Seats >> Bench Seat/Single Seat, Removing And Installing >> Installing

Bench Seat/Single Seat, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

-- Make sure the eyelets on the bench seat fit correctly around the connecting tube on the backrest frame.

-- Press the rear bench seat downward into the mount until it audibly engages.

NOTE:

Make sure the seat heating connector slides all the way on and engages audibly.

scientia non olet · About LEMON Manuals