LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1424 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Sill-Side Trim, Removing And Installing >> Sill-Side Trim, Removing And Installing, Bucket Seat >> Installing

Sill-Side Trim, Removing And Installing, Bucket Seat: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Install In Reverse Order Of Removal
GWWA72-10988Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal And Note The Following: 

-- Make sure the trim -1- on the sill side engages correctly in the seat pan and on the backrest -arrows-.

Tightening specifications. Refer to OVERVIEW - SILL AND TUNNEL SIDE TRIM, BUCKET SEAT  and OVERVIEW - SEAT HEIGHT ADJUSTMENT, BUCKET SEAT .

scientia non olet · About LEMON Manuals