LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1424 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Seat Height Adjustment Handle, Removing And Installing >> Seat Height Adjustment Handle, Removing And Installing, Bucket Seat >> Removing

Seat Height Adjustment Handle, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Retaining Clips Inward And Removing Seat Height Adjustment Handle From Lever
GWWA72-10153Courtesy of AUDI OF AMERICA, LLC

-- Pull the seat height adjustment handle -2- up until it stops and hold it in that position.

-- Use a narrow screwdriver to press the clip -1- toward the inside -arrow A- and remove the seat height adjustment handle from the lever -arrow B-.

scientia non olet · About LEMON Manuals