Overview - Module Carrier With Lumbar Support Air Cushion
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Connector
- For Driver Lumbar Support Adjustment Pump -V152-
- For Front Passenger Lumbar Support Adjustment Pump -V153-
- Connector
- For Driver Lumbar Support Adjustment Pressure Switch -F224-
- For Front Passenger Lumbar Support Adjustment Pressure Switch -F225-
- Hard Foam Block
- For pneumatic components
- Removing and Installing. Refer to MODULE CARRIER WITH LUMBAR SUPPORT AIR CUSHIONS, REMOVING AND INSTALLING .
- Module Carrier with Air Cushions for Lumbar Support
- Secured to hard foam block -3- using plastic plug
- To remove, remove the backrest cushion. Refer to OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .
- Pry off the plastic mandrel using Pry Lever:80-200
- Lumbar Support Adjustment Switch
- Driver Lumbar Support Adjustment Pressure Switch -F224-
- Front Passenger Lumbar Support Adjustment Pressure Switch -F225-
- To remove, remove the backrest cushion. Refer to OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .
- Y-Piece
- For pneumatic hoses to valve blocks
- Lumbar Support Adjustment Valve Block
- Driver Lumbar Support Adjustment Valve Block -N209-
- Front Passenger Lumbar Support Adjustment Valve Block -N210-
- To remove, remove the backrest cushion. Refer to OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .
- Seat Bolster/Backrest Inflation Adjustment Valve Block
- Driver Seat Bolster/Backrest Inflation Adjustment Valve Block -V378-
- Front Passenger Seat Bolster/Backrest Inflation Adjustment Valve Block -V379-
- To remove, remove the backrest cushion. Refer to OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .
- Lumbar Support Adjustment Pump
- Driver Lumbar Support Adjustment Pump -V152-
- Front Passenger Lumbar Support Adjustment Pump -V153-
- To remove, remove the backrest cushion. Refer to OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .
- Secured using rubber band -11- and plastic plugs -10-
- Plastic Plug
- Pry off with Pry Lever:80-200
- Rubber Band