Overview - Front Backrest, Manual Standard Seat
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Seat Pan
- Bolts
- 33 Nm
- Self-locking
- Always replace if removed
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- Backrest
- Removing and Installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .
- Headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH SLIDING LOCKING MECHANISM .
- Entry Assistance Backrest Release
- Overview. Refer to OVERVIEW - ENTRY ASSISTANCE, STANDARD SEAT .
- Removing and Installing. Refer to ENTRY ASSISTANCE HANDLE WITH BRACKET, REMOVING AND INSTALLING .
- Entry Assistance Trim
- Removing and Installing. Refer to ENTRY ASSISTANCE TRIM, REMOVING AND INSTALLING, POWER .
- Wiring Harness
- Running from the thorax airbag to the connector station
- Depending on the equipment version, there may be more wiring harnesses, such as for backrest heating and lumbar support
- Release Cable
- For seat forward/back adjustment
- Removing and Installing. Refer to SEAT FORWARD/BACK ADJUSTMENT RELEASE CABLE, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .
Tightening Specification, Retaining Plate for the DVD Player
-- Tighten the retaining plate bolts -1- to 6 Nm.
Tightening Specification, DVD Player Socket
-- Tighten the nut -2- to 0.4 Nm.