Headrest, Removing And Installing, Headrest With Sliding Locking Mechanism: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Finding Release Button Pressure Point

Courtesy of AUDI OF AMERICA, LLC

-- Find the release button pressure point -3-. It is located under the backrest cover.

-- Press the release button forward in the direction of the -arrow-.

-- Press and hold the release button in this position.

-- Remove the headrest -2- upward from the guides -1 and 4-.

NOTE:

If the release button cannot be released as described, remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, TWO PIECE . Reach under the backrest cover and find the pressure point on the release button.