Headrest Guide, Removing And Installing, Super-Sport Seat: Removing
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling the airbag units (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the front seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .
-- Attach the front seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, TWO PIECE .
-- Remove the backrest cover and cushion/head restraint. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, SUPER SPORT SEAT .
Headrest Guide without Release Button
-- Press the locking tabs -arrows- on the headrest guide toward the center of the headrest guide.
-- Hold the locking tabs down.
-- Pull the headrest guide upward out of the backrest frame -2-.
Headrest Guide With Release Button
-- Press the locking tabs -arrows- on the headrest guide -1- toward the center of the headrest guide.
-- Hold the locking tabs down.
-- Pull the headrest guide upward out of the backrest frame -2-.